Bestfilament pink PLA plastic for 3D printer 1 kg (1.75 mm)

Bestfilament pink PLA plastic for 3D printer 1 kg (1.75 mm) PLA plastic for the 3D printer. Diameter of 1.75 mm. Weight 1 kg Color pink

Specifications:

  • Type: PLA
  • Dia: 1.75 mm
  • Weight netto: 1 kilo
  • Weight brutto: 1.35 kg
  • Dimensions: 20 х 20 х 8 см (0,0032 м3)
SKU: st_pla_1kg_1.75_rose
Main Warehouse: In stock
Quantity:
$27.80
$27.80
  • Description
  • Reviews

PLA (polylactide) is a biodegradable and biocompatible 3D plastic derived from vegetable raw materials. Unlike ABS it doesn't require special conditions, no need for a heated table or thermostabilization the camera.

Printed from PLA large objects are not deformed or cracked. Great for printing large items, and items for which it is important to accurately convey the geometric dimensions. Ideal for print interior, requiring meticulous detail.

Compared to ABS plastic, PLA is more rigid and stiff, but also more fragile. If the item that you type will often be subjected to physical impacts, the PLA may not be the best choice.

PLA is the most environmentally friendly plastic. It has no odor, which allows you to print them in the home or office.

The advantages of PLA Bestfilament:

  • Wide color palette
  • Minimal shrinkage during printing
  • You can print on clean glass
  • No need for a heated platform
  • Energy savings due to the low temperature softening
  • The deviation of the diameter of the rod within the coil is not more than 0.02 mm

Recommended print settings for PLA Bestfilament:
Extruder: 190-230°C
Platform: 0/40-60°C
Print speed: 40-60 mm/s
Air Cooling: Yes
Retracts: Yes
Shrinkage printing: Minor
Solvents: Dichloromethane, Dichloroethane
Operating temperature: -20°C to +40°C

Advice from Bestfilament:

  • The softening temperature of PLA plastic about 50 degrees, so when there is insufficient cooling of a thermal barrier possible softening of the plastic and formation of the tube. To avoid this, provide maximum airflow of the radiator of a thermal barrier.
  • Use a foam filter with some oil (machine or vegetable) when printing PLA plastic to prevent the formation of the tube.
  • PLA plastic retains plasticity for some time after cooling, which is useful, for example, to build composite models. Slightly heat the parts before Assembly to make them easier to connect.




Bestfilament pink PLA plastic for 3D printer 1 kg (1.75 mm) reviews

Be the first to write a review of this product!